511 Porous Plus is a premium, solvent based, no-sheen, natural look penetrating sealer/impregnator designed to provide maximum stain protection especially in food preparation and serving areas. Especially useful on more porous surfaces. Suitable for interior & exterior use. Lasts up to 20 years.
511 Seal & Enhance is a solvent based, penetrating sealer/impregnator formulated to enrich and enhance the color and finish of unpolished natural stone. It also rejuvenates the color and improves the appearance of worn and weathered stone. Suitable for interior and exterior use. Lasts up to 5 years.
511 H2O+ is a premium water-based, stain resistant, below surface penetrating sealer designed to protect against most water-borne contaminants without changing the natural look of the stone. Suitable for interior and exterior use. Lasts up to 10 years.
511 Impregnator is a premium, solvent based, no-sheen, natural look penetrating sealer/impregnator designed to provide maximum stain protection on medium to dense surfaces especially in food preparation and serving areas. Suitable for interior & exterior use. Lasts up to 20 years.
Stone Polish is a buffable, non-yellowing, wax-type finish designed to maintain and protect sealed, polished marble, granite and other surfaces from normal surface wear and abuse. Not for use on Floors.
Tile & Stone Cleaner is a concentrated, biodegradable, neutral cleaner especially designed for the routine maintenance of marble and natural stone. It will not affect existing sealers/impregnators.
Counter Kleen & 511 Kleen & Reseal are non-toxic, neutral cleaners designed for use specifically on counter tops and the like. These products are easy to use simply spray on and wipe off no rinsing necessary.
Limestone & Travertine Stone Soap a natural stone soap that reacts with calcium to create a protective film while enhancing and nourishing honed, tumbled and textured natural stone floors. Use regularly for best performance, easy to use and no rinsing necessary.
Poultice Plus is a fine, non-acidic absorptive clay and abrasive cleaning powder designed for the removal of deep-set oil and grease stains in addition to light grout haze. In the event of stains, water is combined with the powder to create a thick paste which is applied and allowed to "draw" the stain out.
Marble and granite are products of nature. They are quarried from the earth and are subject to variations in veining, coloration, and shading. No two slabs or tiles are exactly alike (including showroom samples). Please inspect tile prior to installation. The finished installation should be viewed as a whole rather than individual tiles. Variation is expected and we cannot guarantee to exactly match any marble or granite.
Green Marble – may contain impurities that can cause warping and/or blistering when installed with setting materials containing water. We strongly recommend the use of a water-free epoxy adhesive (100% solid epoxy) for installing of these tiles.
Black Marble – most of the time black and dark marbles are recommended for vertical and low traffic floor use only (mainly because they tend to show imperfections, staining, and scratching more than lighter colors). If you intend to use these marbles as flooring material. Please take the maintenance steps necessary to protect the finish after installation.